DAVIS Electronic Rain Counter Guía de usuario descargar pdf (Pagina 39)

LED state Description

.PNFOUBSZHSFFOçBTI Communications transmit

.PNFOUBSZBNCFSçBTI Awaiting response

.PNFOUBSZçBTIJOHSFE Communications response error

Momentary solid red No communications response

Solid amber USB plugged in but not active

Solid green USB connection active

Off

No USB communications, or user mode

inactive

Table 16. USB port indicator (Figure 1-16)

LED state Description

4JOHMFHSFFOçBTIFWFSZTFDPOET Voltage above 2 V present

%PVCMFHSFFOçBTIFWFSZTFDPOET Voltage above 10 V present

5SJQMFHSFFOçBTIFWFSZTFDPOET Voltage above 20 V present

Off No power present, or user mode inactive

Table 17. Power port & DC jack indicator (Figure 1-8, 1-17)

Power/user touch button

The touch button input (Figure 1-3) serves multiple purposes, these depend upon

the current state of the C3 and are as follows:

• If the C3 is off, a momentary press will power the C3 up

• If the C3 is on, but not in user mode, a momentary press will activate user

 NPEFOPUJæFECZBOBTDFOEJOHTFSJFTPGCFFQT

• If the C3 is on, a momentary press will send a ‘user visit’ event via the

connected radio

• If the button is held continuously, four short beeps and one long beep will

be heard, after which the C3 will power off. If external power is present the

C3 will restart once the button has been released, else the C3 will remain

4. Appendix

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 89 90

Sin comentarios

DAVIS Electronic Rain Counter Guía de usuario Pagina 39