DAVIS CarChip 8210 Guía de usuario descargar pdf (Pagina 36)

Set Acceleration Thresholds

Use the Set Accelerations Thresholds dialog box to enter the rates of acceleration that define hard acceleration

and extreme acceleration. These thresholds help you monitor how hard the vehicle is being accelerated. Any

time the car’s acceleration exceeds these set limits, the event is logged in the Trip Report.

To set acceleration thresholds:

1. Choose Set Acceleration Thresholds... from the CarChip menu. The CarChip / Set Acceleration

Thresholds dialog box appears.

2. Enter your desired hard and extreme acceleration thresholds.

3. Select Default to use the software default threshold settings. The Default acceleration thresholds are:

0.28 and 0.48 G (US & Metric) and 2.8 and 4.7 m/s2 (S.I.).

4. Choose OK to save the new settings. Choose Cancel to exit the dialog box and retain the previous

settings.

Hard Acceleration Threshold

This is the lower of two acceleration thresholds you can set in CarChip.

The default hard acceleration threshold is:

U.S. = 0.28 G

Metric = 0.28 G

I.S. = 2.8 m/s

Extreme Acceleration Threshold

This is the acceleration rate which defines extreme acceleration. Set this rate at a level which you would not

expect a vehicle to exceed except during an emergency.

The default extreme acceleration threshold is:

U.S. = 0.48 G

Metric = 0.48 G

S.I. = 4.7 m/s

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 60 61

Sin comentarios

DAVIS CarChip 8210 Guía de usuario Pagina 36