DAVIS CarChip 8210 Guía de usuario descargar pdf (Pagina 19)

Serial Port

You must select the correct serial port used to communicate with the CarChip data logger.

To select the serial port:

1. Choose Serial Port from the Setup menu. The Setup / Serial Port dialog box appears.

2. Select the one of the listed serial ports or enter the name of the desired serial port.

3. Choose OK to save the new serial port selection. Choose Cancel to exit the dialog box and retain the

previous serial port selection.

Plots

Use the Plots dialog box to configure your Trip View and Accident view plot options.

To configure the plot display options:

1. Choose Plots from the Setup menu. The Setup / Plots dialog box appears.

2. Click in the square next to each plot option to turn it on or off. A checked box indicates the option is

turned on.

• Check "Draw Speed Bands" to show your speed band settings in the plot.

• Check "Draw Braking Events" to show braking that exceeds your preset braking thresholds.

• Check "Draw Acceleration Events" to show acceleration that exceeds your preset acceleration

thresholds.

• Check "Draw Plots using Lines Rather than Areas" if you only want the line showing the measured data

displayed. Otherwise the area under the measured data will show black in the plot.

• Check "Draw Plot Coordinates Only When Ctrl Key is Pressed" to only display the cursor’s plot

coordinates when the Control key is pressed. The plot coordinates are the elapsed time of the trip and

the data value associated with that time. If not checked, the cursor’s coordinates on the plot are

displayed continuously when the cursor is within the plot area.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 60 61

Sin comentarios

DAVIS CarChip 8210 Guía de usuario Pagina 19