DAVIS CarChip 8210 Guía de usuario descargar pdf (Pagina 33)

• You can have the CarChip’s clock changed to match your computer clock by selected (checking)

Synchronize clocks.

• Choose OK when you are ready to download or choose Cancel to exit the dialog without downloading

your CarChip.

Display CarChip Memory

Use this command to show memory usage by the CarChip data logger.

Note: This command is only available when a CarChip data logger is connected to your computer.

1. Choose Display CarChip Memory from the CarChip menu. The Display CarChip Memory dialog box

appears.

2. Click OK to close the dialog box.

• The amount of memory is displayed in total bytes as well as the percentage of the available memory

used.

• Used shows memory occupied by data.

• Free shows amount of memory available for data.

• Total shows the amount of memory installed in the data logger.

Clear CarChip Memory

This clears the trip log, trouble log, and activity log data stored in the CarChip data logger. The Accident log is

not affected.

To Clear CarChip Memory:

1. Choose Clear CarChip Memory from the CarChip menu.

2. Click Yes to clear the CarChip data logger memory. Click NO to exit the dialog without clearing the data

logger memory.

Enable CarChip LED

This toggles the CarChip LED between Diagnostic Mode and Disabled Mode.

To toggle the CarChip LED between modes:

1. Choose Enable CarChip LED from the CarChip menu.

• The first time you choose Enable CarChip LED, the LED will be set to Diagnostic Mode.

• When the Diagnostic mode is enabled, a check appears next to the command in the CarChip menu.

2. To disable the CarChip LED, choose Enable CarChip LED a second time.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 60 61

Sin comentarios

DAVIS CarChip 8210 Guía de usuario Pagina 33