Davis DriveRight 600E Users Guide (8126, 8179) Manual de usuario descargar pdf (Pagina 22)

Settings Screens

Preparing to Clear Log Data

Continue to hold SET/CLEAR until the DriveRight 600E beeps and

“CLR” disappears from the display. This indicates that the DriveRight

is in the process of clearing data. The DriveRight beeps and “DONE”

appears in the display when the DriveRight finishes clearing data.

DriveRight Finished Clearing Data

Alarm On/Off Screen

The Alarm On/Off Screen toggles the DriveRight 600E’s audible alarm on

and off. When the alarm is on, the DriveRight 600

E beeps when any of the

set limits are exceeded, warning the driver of the violation. Turning the

alarm off disables the beeping, though the DriveRight 600

E continues to

record violations of the set limits.

Alarm On/Off Screen

The following option is available in the Alarm On/Off Screen:

• Toggle the Alarm Setting — Press and release SET/CLEAR to toggle

the alarm setting from On to Off (or vice versa). Each time SET/

CLEAR is pressed, the display changes between “ON” and “OFF”.

Calibration Screen

The Calibration Screen calibrates the DriveRight 600E for the desired

vehicle.

See “Calibrating the DriveRight 600E” on page 4 for details.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Sin comentarios

Davis DriveRight 600E Users Guide (8126, 8179) Manual de usuario Pagina 22