Davis Vantage Pro ISS Fan-Aspirated Add., 2003 & lat Manual de usuario

Busca en linea o descarga Manual de usuario para Los termómetros Davis Vantage Pro ISS Fan-Aspirated Add., 2003 & lat. DAVIS Vantage Pro ISS Fan-Aspirated Add., 2003 & later User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 16
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Product # 6151, 6151C, 6161, 6161C
INTEGRATED S ENSOR SUITE
WITH
FAN-ASPIRATED
R
ADIATION SHIELD
ADDENDUM, REV B
For Vantage Pro
®
and Vantage Pro Plus
The Vantage Pro Integrated Sensor Suite (ISS) with the Fan-Aspirated Radia-
tion Shield uses a combination of fan-aspiration and shielding to minimize the
effects of solar radiation-induced temperature error.
Fan-Aspirated ISS Addendum Overview
This addendum provides additional information specific to the installation and
use of the fan-aspirated radiation shield only, and is intended to be used in con-
junction with the “Integrated Sensor Suite Installation Manual.”
The table below shows the location of the information required to install and
maintain your Fan-Aspirated ISS.
S
ECTION/PROCEDURE IN THIS
A
DDENDUM
IN THE ISS
I
NSTALLATION
M
ANUAL
Tools for Setup X
Preparing the Anemometer X
Preparing the Rain Collector X
Disassembling the Radiation Shield X
Making Junction Board Connections X
Powering ISS and Testing Communica-
tions
X
Powering and Testing the Fan X
Reassembling the Radiation Shield X
Choosing a Site for the ISS X
Mounting the ISS X
Additional Mounting Options X
Fan-Aspirated ISS Options X
Fan-Aspirated ISS Maintenance X
Theory of Operation X
Fan-Aspirated ISS Troubleshooting X
Fan-Aspirated ISS Specifications X
ISS Fan Rev B.fm Page 1 Thursday, November 14, 2002 4:29 PM
Vista de pagina 0
1 2 3 4 5 6 ... 15 16

Indice de contenidos

Pagina 1 - ADDENDUM, REV B

Product # 6151, 6151C, 6161, 6161CINTEGRATED S ENSOR SUITE WITHFAN-ASPIRATED RADIATION SHIELDADDENDUM, REV BFor Vantage Pro® and Vantage Pro Plus™The

Pagina 2 - Components

Page 10 Addendum, Rev B4. Gently place the mounting bracket on top of the radiation shield, being careful to line up the three screw holes and also be

Pagina 3 - Vantage Pro Plus ISS

Applying Power and Testing Communications Page 11Applying Power and Testing CommunicationsCabled Vantage Pro: Powering the ISS and Testing Communica-t

Pagina 4 - Preparing the Anemometer

Page 12 Addendum, Rev BWireless Vantage Pro: Powering the ISS and Testing Communi-cation with the Console1. Connect the Solar Power Cable to the SIM a

Pagina 5 - Preparing the Rain collector

Additional Mounting Options Page 13Additional Mounting OptionsRefer to this section in your ISS Installation Manual.Fan-Aspirated ISS Installation Opt

Pagina 6 - Removing the Mounting Bracket

Page 14 Addendum, Rev BA low-current fan (#7759) is available that uses less power than the standard fan. This allows the solar-powered Fan-Aspirated

Pagina 7 - Powering the Fan

Theory of Operation Page 15Contacting Davis Instruments(510) 732-7814 for Technical Support, Monday – Friday, 7:00 a.m. – 5:30 p.m. Pacific Time. supp

Pagina 8 - Installing the Batteries

Product Numbers: 6151, 6151C, 6161, 6161CDavis Instruments Part Number: 7395.152 Integrated Sensor Suite with Fan-Aspirated Radiation Shield Addendum,

Pagina 9

Page 2 Addendum, Rev BComponents The Fan-Aspirated ISS includes these components:SolarPanel(wirelessmodelsonly)AspiratedRadiation ShieldDebris Screen(

Pagina 10 - Connecting the Sensors

Components Page 3The hardware shown here is provided for assembly and mounting: Additional Components on Vantage Pro PlusVantage Pro Plus includes an

Pagina 11 - ISS SIM Connections

Page 4 Addendum, Rev BTools for Installation• Small Phillips-head screwdriver • Scissors or wire-cutters• Adjustable wrench or 7/16" wrench• Comp

Pagina 12 - Mounting the ISS

Preparing the ISS for Installation Page 5Disassemble the Radiation Shield1. Remove the three screws connecting the rain collector base from the mounti

Pagina 13 - Additional Mounting Options

Page 6 Addendum, Rev B2. Lift the rain collector base off of the mounting bracket. Tip: For easier re-assembly, mark the holes in the mounting bracket

Pagina 14 - Fan-Aspirated ISS Maintenance

Preparing the ISS for Installation Page 7Powering the FanThe Cabled ISS fan is powered by an AC-power adapter. The Wireless ISS fan is solar-powered a

Pagina 15 - Theory of Operation

Page 8 Addendum, Rev BConnecting Solar Power (Wireless ISS)1. Locate the Junction Board on the fan plate (See below).2. Connect the solar power cable

Pagina 16

Preparing the ISS for Installation Page 9Reassembling the Radiation Shield1. Make sure the Temp/Hum sensor cable runs through the provided cable chann

Comentarios a estos manuales

Sin comentarios