Davis Universal Anemometer Interface for Vantage Pro2 Manual de usuario descargar pdf (Pagina 11)

If You Do Not See Current Wind Readings

RefertoyourISSInstallationManualorAnemometerTransmitter KitManual.

Note: It is assumed that the ISS or Anemometer Transmitter Kit has been installed and tested as

instructed in the ISS or Anemometer Transmitter Kit manual.

A Note on Securing Cables

Preventfrayingorcuttingofcablesbysecuringthemsotheywillnotwhip

aboutinthewind.Secureacabletoametalpolebywrappingelectricaltape

aroundthemboth.Placingclipsortiesapproximatelyevery3–5ʹ(1–1.6

m)

Note: Do not use metal staples or a staple gun to secure cables. Metal staples — especially when

installed with a staple gun — have a tendency to cut the cables.

Secureanyunusedcablebycoilingandtapingcoiltothepole,orhangingitona

hookonthepost.Placethecoilatleast6ʺawayfromtheantenna.

Troubleshooting

“Thepropellerorwindcupsarespinningbutmyconsoledisplays0mph.”

Thesignalfromthewindcupsisnotbeingreceivedbytheconsole.Check

yourcablesforvisiblenicksandcuts.LookforcorrosionintheWIND

jackontheSensorInterfaceModuleandonsplicesinthecable(ifany).If

noneofthesestepssolvetheproblem,callTech

Supporttoaskforawind

testcable.

“Windreadingsaren’twhatIexpectedthemtobe.”

Beverycareful.ComparingtomeasurementsfromTV,radio,newspa‐

pers,oraneighborisNOTavalidmethodofverifyingyourreadings.If

youhavequestions,contactyouranemometermanufacturer.

Contacting Davis Instruments

Note: Try to identify the source of a problem before contacting Technical Support. If the problem is with

the anemometer, you should contact that manufacturer’s technical support. If the problem is with

the Universal Anemometer Interface or the Vantage Pro2, contact Davis Technical Support.

(510)732‐7814forTechnicalSupport,Monday–Friday,7:00a.m.–5:30p.m.PST

(800)678‐3669Toll‐FreeOrderLine,Monday–Friday,7:00a.m.–5:30p.m.PST

Ourcustomerservicerepresentativescananswermostquestionsandassistyou

withyourpurchases.

(510)732‐9229ForcallersoutsidetheUSAorCanada.

(510)670‐0589FaxtoCustomerServiceorTechSupport.

www.davisnet.comCopiesofUserManualsareavailableonthe“Support”page.

WatchforFAQsandotherupdates.Subscribetothee‐newsletter.

[email protected]E‐mailtoTechnicalSupport.

[email protected]E‐mailtoCustomerService.

[email protected]Generale‐mail.

Note: Please do not return items to the factory for repair without prior authorization.

1 2 ... 6 7 8 9 10 11 12

Sin comentarios

Davis Universal Anemometer Interface for Vantage Pro2 Manual de usuario Pagina 11