Davis Mounting Tripod Kit Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Los termómetros Davis Mounting Tripod Kit. DAVIS Mounting Tripod Kit User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 8
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
1
Mounting Tripod Kit
Installation Manual
For use with Davis’s wireless and cabled Vantage Pro2 weather stations, the
Mounting Tripod simplifies installation. The tripod supports the Integrated
Sensor Suite (ISS) or other station, and features an adjustable foot pad
which enables mounting on level surfaces or roof peaks.
Components
The Mounting Tripod includes the following poles and mounting hardware.
Please make sure you have everything you need before beginning.
Poles
Hardware
Tripod
Anemometer
Extension
Tube
Long
Extension
Tube
(swaged end)
5/16" Flat Washers
5/16" Lock Washers
5/16"
Lock Washer
1/4" Bolt screws
Hex Nut
Label
Pitch Pads
5/16" Heavy Duty
Hex Nuts
5/16" Bolt screws
Bracket
U-Bolt
1/4" x 2" Lag Screws
5/16" Square Nuts
8" Cable Ties
Saddle
Vertical
Stop
Plate
Hex Nuts
Heavy Duty
Vista de pagina 0
1 2 3 4 5 6 7 8

Indice de contenidos

Pagina 1 - Installation Manual

1Mounting Tripod KitInstallation ManualFor use with Davis’s wireless and cabled Vantage Pro2 weather stations, the Mounting Tripod simplifies installa

Pagina 2 - Tripod Assembly

Tripod Assembly2Tools for Setup• Adjustable wrench• Compass or local area map• Drill with 3/16" or 13/64" (5 mm) bit for the 1/4" lag s

Pagina 3 - Mounting the Tripod

Mounting the Tripod38. Attach the foot bracket to the tripod leg as shown.Apply pitch pads to the bottom of the foot bracket and the two foot brackets

Pagina 4

Mounting the Tripod4For more information, contact your local lightning protection authority and/or refer to the following articles: • MIL-HDBK-419A: G

Pagina 5

Mounting the Tripod5When both sides of the ISS are mounted together with the anemometer arm pointing north, the solar panel on the rain collector side

Pagina 6

Securing the ISS on the Tripod64. Tighten the hex nuts using an adjustable wrench or 7/16" wrench. 5. Re-attach the rain collector cone. 6. Set t

Pagina 7

Attaching a Complete System Shelter7Attaching a Complete System ShelterInstall a complete system shelter or multi-purpose shelter the same way you wou

Pagina 8 - Contacting Davis Instruments

Product Number: #7716Davis Instruments Part Number: 7395.299Mounting Tripod Kit Installation ManualRev. G Manual (12/10/08)This product complies with

Comentarios a estos manuales

Sin comentarios