DAVIS Wireless Repeaters for VP2 Manual de usuario descargar pdf (Pagina 5)

Rev A 7/28/06 25 - 5

USING ONE REPEATER WITH MULTIPLE TRANSMITTERS

More than one transmitter can be repeated. Select additional transmitter ID’s with the DIP

switches and the repeater will receive all these ID’s and re-transmit them.

USING MULTIPLE REPEATERS

If you need even greater distance between the transmitter and the receiver, up to eight

Repeaters can be strung together in a “chain”.

The second repeater in a chain is normally Repeater B. Repeater B will always look for

Repeater A. Once it acquires any Transmitter ID being re-transmitted by Repeater A, it will get

the list of all Transmitter ID’s being re-transmitted by Repeater A. It will then continue

acquisition until it has successfully found all re-transmitted ID’s on the list. You do not need to

tell Repeater B which ID’s to get from Repeater A, it will automatically get the list from Repeater

A. In the factory default case (Transmitter ID 1 on Repeater A only), Repeater B is done as

soon as it acquires ID 1 from Repeater A, as it is the only ID on the list.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Sin comentarios

DAVIS Wireless Repeaters for VP2 Manual de usuario Pagina 5